Recycling center Junkyards

Allmetal Recycling - 29th Street at 2829 N Emporia St, Wichita, KS Allmetal Recycling is a Wichita auto salvage yard and scrap metal recycler. Located at 2829 N Emporia St, it lets customers find and remove parts from wrecked vehicles on their own. The yard carries parts for both domestic and foreign cars, including engines, transmissions, electrical components, and body panels. They also buy junk cars from tow companies and auctions, then break them down for reusable parts or recycle the metal. The 11,000-square-foot yard usually holds over 250 vehicles at once. Customers can visit during business hours to search for parts, and staff help with identifying and removing them. Since 1989, Allmetal Recycling has been a local spot for affordable auto parts and scrap metal recycling. Services & What to Expect Allmetal Recycling runs a self-service salvage yard where customers can: Search and remove parts from wrecked vehicles Buy used auto parts (domestic and foreign) Get help from staff with part identification and removal Recycle scrap metal from vehicles The yard stocks a variety of parts, such as: Engines and transmissions Alternators and starters Brake and suspension parts Body panels and glass Electrical components (wiring, sensors, etc.) Bring your own tools for part removal. Staff can point you to the right parts but don’t provide tools or help with disassembly. Prices depend on the part’s condition and demand, and you pay when you buy. If you have a junk car to sell, Allmetal Recycling may buy it for scrap or parts. For other options, check out local cash-for-cars buyers in Wichita. Location & Hours Allmetal Recycling is at 2829 N Emporia St, Wichita, KS 67219. The yard is open Monday through Friday from 8:00 AM to 4:30 PM and closed on weekends and holidays. The yard is near: 29th Street (0.1 miles away) Wichita State University (2.5 miles away) The I-35 and I-135 interchange (3 miles away) Since it’s self-service, bring your own tools. Parking is available for cars and trailers. Frequently Asked Questions What are the hours for Allmetal Recycling? The yard is open Monday through Friday from 8:00 AM to 4:30 PM. It’s closed on weekends and holidays. Does Allmetal Recycling buy junk cars? Yes, they buy junk cars from tow companies and auctions. Vehicles are broken down for parts or recycled. If you have a car to sell, contact them or look at other cash-for-cars options in Wichita. What kind of parts can I find at Allmetal Recycling? The yard has a wide selection of used auto parts, including engines, transmissions, alternators, starters, brake systems, suspension parts, body panels, glass, and electrical components. Parts are available for both domestic and foreign vehicles. How does self-service auto salvage work here? Customers browse the yard to find parts. Staff can help identify and remove them, but you must bring your own tools. Payment is made at the time of purchase, and the yard doesn’t provide disassembly labor. Do I need to bring tools to remove parts? Yes, you’re responsible for bringing your own tools. The yard doesn’t supply tools or help with disassembly. Is there a guarantee on parts purchased here? The business doesn’t list a guarantee policy in available information. Ask staff about returns or exchanges when you buy. Recent News & Updates As of the latest updates, Allmetal Recycling is still operating at 2829 N Emporia St in Wichita. The yard has kept its self-service model since 1989, with no major changes to hours or services. For the most current details, visit the official website .

12th & Haskell Recycling Center at 1006 E 11th St, Lawrence, KS 66046 12th & Haskell Recycling Center is a Lawrence auto salvage yard and scrap metal recycler at 1006 E 11th St. Customers can remove parts from junked cars themselves, buy used auto parts, or drop off scrap metal. The yard serves individuals hunting for cheap car parts and businesses needing scrap metal processing. It’s open weekdays from 8:30 AM to 3:45 PM and Saturdays from 8:30 AM to 11:45 AM, with Sundays closed. Services & What to Expect 12th & Haskell is a self-service salvage yard where customers find and remove their own parts from wrecked vehicles. The yard handles: Self-service auto salvage – Look through junked cars for parts like engines, transmissions, doors, and interior pieces. Common finds include fenders, batteries, and suspension components. Scrap metal recycling – The yard takes car parts, appliances, and construction scrap. Prices depend on metal type and weight. Used auto parts sales – Some pre-removed parts (batteries, alternators, brake components) are sold at the counter. Vehicle dismantling – The business strips down end-of-life cars for reusable parts and recycles the rest. Bring your own tools if you’re removing parts. Fees are charged per part or by weight—staff won’t remove parts for you. The yard may buy or accept donations of old cars or scrap metal, but call ahead to confirm what they take. Need to get rid of a junk car or sell scrap metal? This location might work, but check their rules first. Location & Hours The recycling center is at 1006 E 11th St, Lawrence, KS 66046, near 11th Street and Haskell Avenue. Parking is available on-site. Day Hours Monday 8:30 AM – 3:45 PM Tuesday 8:30 AM – 3:45 PM Wednesday 8:30 AM – 3:45 PM Thursday 8:30 AM – 3:45 PM Friday 8:30 AM – 3:45 PM Saturday 8:30 AM – 11:45 AM Sunday Closed The yard is closed Sundays. Arrive before closing for help—staff may not assist latecomers. For directions, use Google Maps or plug the address into a navigation app. Frequently Asked Questions What are the hours for 12th & Haskell Recycling Center? The yard is open Monday to Friday from 8:30 AM to 3:45 PM and Saturdays from 8:30 AM to 11:45 AM. It’s closed Sundays. Plan to arrive early if you need help. Does 12th & Haskell Recycling Center buy junk cars? The yard is mainly a self-service salvage and scrap metal recycler. They may take junk cars for dismantling, but policies change. Call (785) 865-3730 or check their website to confirm. What kind of parts can I find here? The yard has used auto parts from wrecked vehicles, including: Engines and transmissions Doors, fenders, and body panels Batteries, alternators, and starters Brake rotors, calipers, and pads Shocks, struts, and control arms Seats, dashboards, and interior trim Parts are sold self-service—you find and remove them yourself. Some pre-removed parts are available at the counter. How does self-service salvage work? Customers browse the yard, pick the parts they need, and remove them with their own tools. Pay before leaving—fees are per part or by weight. Staff can help with pricing or part locations but won’t remove parts for you. Always confirm fees upfront. Can I sell scrap metal here? Yes, the yard buys scrap metal like: Car engines, frames, and bumpers Appliances (washing machines, fridges) Construction scrap (copper wire, steel beams) Household metals (aluminum cans, iron) Prices depend on metal type and weight. Call ahead to check what they accept. Are there rules for removing parts? The yard follows first-come, first-served rules. Customers should: Arrive during open hours—staff may not help late arrivals. Bring tools (the yard doesn’t provide them). Pay before leaving. Avoid parts marked as "reserved" or "sold." Follow safety rules (wear gloves, avoid sharp metal). Theft or damage isn’t allowed. Recent News & Updates 12th & Haskell Recycling Center remains open as a self-service salvage and scrap metal recycler in Lawrence. It’s listed on directories like RecyclingMonster , iScrap , and ScrapMonster , showing it’s active in the industry. For the latest on hours, services, or policies, check the website or call (785) 865-3730 .

We Buy Scrap LLC at 1141 Old Okeechobee Rd, West Palm Beach, FL 33401 We Buy Scrap LLC is a self-service auto salvage yard and scrap metal recycling business at 1141 Old Okeechobee Rd in West Palm Beach. Customers can remove parts from junked vehicles themselves or sell scrap metal and junk cars. The yard is open Monday through Friday from 8:00 AM to 4:00 PM and closed on weekends. This is a straightforward self-service operation where you can find used auto parts for repairs, restorations, or DIY work. The yard doesn’t clean or test parts, so you’ll need to check them before taking them. They also buy scrap metal like copper, aluminum, steel, and other non-ferrous metals. The business has served West Palm Beach for several years, helping individuals find affordable parts and businesses recycle scrap metal. While they don’t have online reviews, you can reach them through their Facebook page for questions. Services & What to Expect We Buy Scrap LLC offers two main services: a self-service auto salvage yard and scrap metal recycling. Here’s what you need to know when visiting: Self-Service Auto Salvage U-pull-it access: Walk in during business hours to browse and remove parts from junked vehicles. No appointment is needed. Part selection: The yard has a mix of domestic and foreign cars, trucks, and SUVs. Common parts include engines, transmissions, doors, fenders, bumpers, and interior components. Tools and equipment: Bring your own tools—sockets, wrenches, and pry bars. The yard doesn’t provide tools for part removal. Part inspection: You’re responsible for checking parts before removal. We Buy Scrap LLC doesn’t guarantee condition or functionality. Payment: Parts are sold by weight at the yard’s current scrap metal rate. You pay after removing and inspecting the part. Scrap Metal Recycling Accepted materials: The yard buys non-ferrous metals like copper, aluminum, and brass, as well as ferrous metals such as steel and iron. Call ahead to confirm if they accept specific materials. Pricing: Scrap metal is bought by the pound, with rates changing based on market conditions. Current prices aren’t listed online, so call for updates. Drop-off hours: Scrap metal can be dropped off Monday through Friday, 8:00 AM to 4:00 PM. Weekend drop-offs aren’t available. What to Bring A valid driver’s license or government-issued ID. Cash or a debit card (credit cards may not be accepted). Tools for part removal, including sockets, wrenches, and pry bars. Gloves and safety gear—the yard has sharp metal and debris. A vehicle or trailer to haul parts (some may be large or heavy). What NOT to Bring Weapons or illegal substances—the yard has security measures. Children under 16—the yard isn’t safe for kids. Stolen property—the business can refuse service if they suspect theft. Getting Rid of a Junk Car If you have an old car, truck, or SUV to sell, We Buy Scrap LLC may take it. They don’t currently advertise a cash-for-cars program, so call (561) 633-0446 or visit their website for details. Location & Hours We Buy Scrap LLC is at 1141 Old Okeechobee Rd, West Palm Beach, FL 33401 , in an industrial area near the intersection of Old Okeechobee Rd and 45th St. It’s easy to reach from US-1 and I-95. Business Hours Day Open Close Monday 8:00 AM 4:00 PM Tuesday 8:00 AM 4:00 PM Wednesday 8:00 AM 4:00 PM Thursday 8:00 AM 4:00 PM Friday 8:00 AM 4:00 PM Saturday Closed Closed Sunday Closed Closed Directions From I-95: Take Exit 56 for FL-808 N/Okeechobee Rd toward West Palm Beach. Drive about 2.5 miles on FL-808 N (Old Okeechobee Rd). The yard is on your right at 1141 Old Okeechobee Rd. Watch for the sign near the entrance. From US-1 (Federal Hwy): Turn west onto 45th St toward Old Okeechobee Rd. Drive about 0.3 miles, then turn right onto Old Okeechobee Rd. The yard is on your left at 1141 Old Okeechobee Rd. GPS may not always give the best directions. If you’re unfamiliar with the area, allow extra time to find the entrance. Contact Information Phone: (561) 633-0446 (call for scrap metal pricing or yard questions). Website: webuyscrapllc.com (limited online info available). Facebook: We Buy Scrap LLC (for updates or questions). Frequently Asked Questions What are the hours for We Buy Scrap LLC? The yard is open Monday through Friday from 8:00 AM to 4:00 PM. It’s closed on weekends and holidays. For the latest hours, call (561) 633-0446, as schedules can change. Does We Buy Scrap LLC buy junk cars? We Buy Scrap LLC mainly runs a self-service salvage yard and scrap metal recycling business. While they do take junked vehicles for scrap, they don’t currently advertise a cash-for-cars program. For the latest on selling your car, call (561) 633-0446 or check their website . What kind of parts can I find at We Buy Scrap LLC? The yard has a mix of domestic and foreign cars, trucks, and SUVs. Common parts include: Engines and transmissions (some may have core charges). Body panels like doors, fenders, hoods, and bumpers. Interior parts such as seats, dashboards, and trim pieces. Suspension and drivetrain components like control arms, axles, and differentials. Electrical parts including wiring harnesses, alternators, and starters. The selection changes daily as vehicles are added or removed. All parts are sold "as-is," so check them carefully before buying. How does self-service auto salvage work at We Buy Scrap LLC? The process is simple: Arrive during business hours (Monday–Friday, 8:00 AM–4:00 PM) with a valid ID and payment. Browse the yard for the part you need. Vehicles are grouped by make and model, but the layout isn’t always clear. Inspect the part thoroughly. The yard doesn’t guarantee parts work, so test them before removal. Remove the part using your own tools. The yard doesn’t provide tools or help with removal. Weigh and pay for the part at the scale house. You’re charged based on the metal weight. Load and leave with your part. Some may need a trailer or truck to haul. Note: Clean up any debris you create while removing parts. Do I need an appointment to visit We Buy Scrap LLC? No, appointments aren’t required. The yard operates on a first-come, first-served basis during open hours. Call ahead if you: Have a large order or multiple parts to remove. Need to check scrap metal prices before dropping off materials. Have questions about specific parts or vehicles in the yard. Walk-ins are welcome, but staff may be busy with other customers. Are there any restrictions on what I can remove from the yard? Yes, We Buy Scrap LLC has a few rules: No airbag parts: Parts with deployed or undeployed airbags aren’t allowed for safety reasons. No catalytic converters: These are often stolen and may require special paperwork to remove. No hazardous materials: Parts with fluids like oil or coolant must be drained before removal. The yard doesn’t dispose of fluids. No stolen property: The business can refuse service if they suspect theft. No disassembling vehicles: You can’t take apart cars for small parts beyond removing whole components. Breaking these rules may get you banned from the yard. Recent News & Updates As of mid-2024, We Buy Scrap LLC hasn’t shared major updates about new services or yard changes. However, based on industry trends and similar businesses in the area, here’s what you should know: Scrap metal prices: Copper and aluminum prices change often due to global market shifts. We Buy Scrap LLC adjusts their rates accordingly, so call for current pricing. Inventory changes: The yard’s selection varies as vehicles are added or removed. Hurricane season and other events can bring in more damaged cars, increasing part availability. There’s no online inventory list. Safety rules: The yard likely has safety measures like restricted areas, hazard signs, and requirements for protective gear. Expect warnings for sharp metal, heavy equipment, and uneven ground. Competitor services: Other West Palm Beach u-pull-it yards sometimes offer parts cleaning, testing, or online catalogs. We Buy Scrap LLC keeps it simple with self-service part removal and scrap metal recycling. For the latest details, check their Facebook page or call (561) 633-0446. The website isn’t regularly updated with news.

Midwest Recyclers is a local business located at 530 S Howell Street in Davenport, Iowa. With over 25 years of experience in the automotive recycling industry, Midwest Recyclers specializes in used car parts, junkyard services, salvage yard operations, scrap metal dealer services and an extensive selection of used auto parts for all make and model vehicle types. We have become a trusted source for recycled car parts throughout the Midwest region with our commitment to quality and service. Our staff consists of highly trained professionals who are knowledgeable in the various aspects of auto recycling. Our team works hard to ensure that the quality of our products meet or exceed industry standards. We understand that buying recycled auto parts can sometimes feel like a risk, but we strive to make it as easy as possible by providing detailed information on every part we sell. Additionally, each part comes with our guarantee so you know you’re getting exactly what you need. At Midwest Recyclers, we take pride in being able to offer our customers an eco-friendly option when it comes to auto parts – helping them save money while also reducing the amount of waste produced from new part manufacturing processes. We understand that auto recyclers are important members of any community and strive to maintain a positive relationship with other businesses in the area by engaging in ethical practices and playing an active role within it.

Executive Recycling at 1545 W Wrightwood Ct, Addison, IL 60101 Executive Recycling is a self-service auto salvage yard and scrap metal recycling center in Addison. Located at 1545 West Wrightwood Court, it offers used auto parts for repairs and restorations, along with scrap metal recycling. Customers can browse and remove parts themselves during open hours without needing an appointment. The yard takes copper, aluminum, steel, and other scrap metals, following local rules. It’s a simple process: find the part, take it, and pay at the front desk. Services & What to Expect Executive Recycling is a self-service salvage yard, meaning customers handle part searches and removal themselves during open hours. The yard carries parts from many vehicle types, including engines, transmissions, body panels, suspension components, and interior parts. Scrap metals like copper, aluminum, and steel are also accepted for recycling. There’s no online part search or pre-ordering, so customers must visit in person to find and remove parts. How Self-Service Salvage Works To use the salvage yard, visit during open hours. Basic tools are available on-site for part removal, but customers may need to bring their own for specific jobs. Once a part is found and removed, payment is made at the front office. The process is simple: arrive, locate the part, remove it, and pay. No appointments are needed. Scrap Metal Recycling Executive Recycling accepts scrap metals for recycling, including copper, aluminum, and steel. Customers can drop off scrap metal during open hours and pay at the front office. The business follows local recycling rules to ensure a smooth process. Customer Experience Reviews show a no-hassle experience, with customers praising the straightforward process and friendly staff. One customer said, "Got in, got out, no waiting. Exactly how it should be." Another noted, "Quick, no hassle, and they don’t lowball you." The yard is also known for fair pricing and helpfulness, with a long-time customer saying, "They pay what they say they’ll pay, no games." Special Notes For large or unusual items like car shells without engines or transmissions, customers should ask staff for the best way to handle the drop-off. The yard has experience with such items and can provide guidance. The business also welcomes educational visits, as seen when a parent brought a Cub Scout troop for a field trip. Staff made the visit engaging for the kids. Location & Hours Executive Recycling is at 1545 West Wrightwood Court in Addison. The yard is open Monday through Friday from 7:00 AM to 4:00 PM and on Saturday and Sunday from 7:00 AM to 12:30 PM. It’s closed on major holidays, but customers should check for specific closures. Directions The yard is near major roads and highways, making it easy to reach. For real-time traffic and directions, use Waze or Google Maps . The address is 1545 West Wrightwood Court, Addison, IL 60101. Nearby Amenities Addison has restaurants, gas stations, and auto repair shops nearby. Customers can find food, fuel, and other services while visiting the yard. Frequently Asked Questions What are the hours for Executive Recycling? Executive Recycling is open Monday through Friday from 7:00 AM to 4:00 PM and on Saturday and Sunday from 7:00 AM to 12:30 PM. The business is closed on major holidays, but customers should confirm specific closures in advance. Does Executive Recycling buy junk cars? Yes, Executive Recycling buys junk cars and scrap metal. Customers can drop off vehicles or scrap metal during open hours and pay at the front office. For more details, visit our cash for junk cars page. What kind of parts can I find at Executive Recycling? Executive Recycling carries a wide range of used auto parts, including engines, transmissions, body panels, suspension components, and interior parts. The yard has parts from many vehicle makes and models, making it a good place for repairs and restorations. Customers should visit in person to see what’s available. How does self-service auto salvage work at Executive Recycling? Self-service salvage at Executive Recycling is simple. Customers visit during open hours, find the part they need, remove it using available tools (or their own), and pay at the front office. No appointments are needed. Basic tools are provided, but customers may need to bring their own for certain jobs. Do I need to bring my own tools? Executive Recycling provides basic tools for part removal, but customers may need to bring their own for specific jobs. It’s a good idea to check ahead or bring essential tools to make the process easier. Can I drop off a car shell or large scrap metal? Yes, Executive Recycling takes car shells and large scrap metal items. Customers should ask staff for the best way to handle the drop-off, especially for items like car shells without engines or transmissions. Staff can guide them through the process.

G3 Scrap Metal at 512 Midway Rd, Weslaco, TX 78596 G3 Scrap Metal is a self-service auto salvage yard and scrap metal recycling business at 512 Midway Rd in Weslaco. Customers can browse and remove parts from junked vehicles themselves. The yard also handles metal recycling, processing steel, aluminum, copper, brass, and other scrap materials. It serves both individuals looking for affordable auto parts and businesses needing scrap metal for recycling. Services & What to Expect G3 Scrap Metal runs a self-service auto salvage operation. Customers can search for and remove parts from dismantled vehicles on their own. Common parts available include engines, transmissions, body panels, electrical components, and interior parts. All parts are sold as-is with no warranties, so customers should inspect them before buying. Beyond auto salvage, the yard takes in scrap metal for recycling. Accepted materials include: Copper wire and piping Aluminum cans and sheets Brass sheets and fittings Steel beams and scrap Other ferrous and non-ferrous metals The yard processes these materials to keep them out of landfills. G3 Scrap Metal doesn’t publicly advertise buying vehicles, but if you need to sell a junk car, you can check for cash offers from local buyers in the area. The yard operates on a self-service basis. Customers should: Bring their own tools for part removal Pay for parts at the time of removal (cash or card, if available) Follow safety rules while on the premises Dispose of debris properly Staff can answer questions but don’t help with part removal. Location & Hours G3 Scrap Metal is at 512 Midway Rd, Weslaco, TX 78596, in an industrial area near the city limits. It’s easy to reach from US-83 or FM-1016 for drivers coming from McAllen or Harlingen. Business Hours: Day Hours Monday 8:15 AM – 12:00 PM Tuesday 8:15 AM – 12:00 PM Wednesday 8:15 AM – 12:00 PM Thursday 8:15 AM – 12:00 PM Friday 8:15 AM – 12:00 PM Saturday 8:15 AM – 12:00 PM Sunday Closed Hours can change, so call ahead at (956) 968-5461 to confirm before visiting. The yard doesn’t have Google reviews, so experiences may vary. For updates, check the official website or the business’s Facebook page . Frequently Asked Questions What are the hours for G3 Scrap Metal? G3 Scrap Metal is open Monday through Saturday from 8:15 AM to 12:00 PM. The yard is closed on Sundays. Hours may change, so call (956) 968-5461 to confirm before your visit. Does G3 Scrap Metal buy junk cars? G3 Scrap Metal doesn’t advertise buying vehicles, but you can check for cash offers from local junkyards in Weslaco. Many scrap yards in the area accept cars for recycling, so calling ahead is the best way to find out. What kind of parts can I find at G3 Scrap Metal? G3 Scrap Metal offers used auto parts from dismantled vehicles, including: Engines and transmissions Body panels (doors, hoods, fenders) Bumpers and grilles Electrical components (alternators, starters, wiring) Interior parts (seats, dashboards, trim) Suspension and drivetrain parts Inventory changes often, so call or visit to see what’s available. How does self-service auto salvage work at G3 Scrap Metal? At G3 Scrap Metal, customers remove parts themselves. Here’s how it works: Find the part: Look through the yard for the vehicle with the part you need. Check the part: Inspect it before buying—parts are sold as-is. Remove the part: Bring your own tools to take it off the vehicle. Pay for the part: Pay at the yard’s payment area (cash or card, if available). Clean up: Dispose of debris in the designated areas. Staff can answer questions but don’t help with removal. Wear gloves or safety gear if needed. Are there any restrictions on what I can remove from vehicles at G3 Scrap Metal? G3 Scrap Metal is self-service, but some parts may be off-limits. Typically, you can’t: Take parts from vehicles not marked for salvage Remove safety-critical parts (like airbags or seatbelts) without approval Remove catalytic converters, which are often restricted Damage other parts or vehicles while taking what you need Ask staff before removing any part to avoid issues. The yard may also limit part sizes or weights. Can I sell scrap metal to G3 Scrap Metal? Yes, G3 Scrap Metal buys scrap metal for recycling. They typically take: Copper wire and piping Aluminum cans and sheets Brass sheets and fittings Steel beams and scrap Other ferrous and non-ferrous metals Pricing is based on weight and current market rates. Call (956) 968-5461 to confirm what they’re buying and ask about pricing. Large loads may need an appointment. Recent News & Updates G3 Scrap Metal has been operating in Weslaco since 2019, specializing in auto salvage and scrap metal recycling. It’s listed as a u-pull-it yard in salvage directories, serving customers who prefer to remove their own parts. While no recent news has been published, the yard remains open for auto parts and scrap metal recycling in the Rio Grande Valley. For the latest details, visit the official website or check the business’s Facebook page . More information on u-pull-it yards and scrap metal recycling can be found on industry sites like U-Pull-It and RecyclingMonster .

Mark Paule Metal Recycling at 1749 Freeburg Ave, Belleville, IL 62220 Mark Paule Metal Recycling is a scrap metal buyer and auto salvage yard in Belleville, Illinois, at 1749 Freeburg Ave. The business handles scrap metals like aluminum, brass, lead, and stainless steel, along with used auto parts from salvaged vehicles. It serves the Metro-East and St. Louis areas, offering a self-service yard where customers can find parts from dismantled cars and trucks. The yard also takes care of junk removal and vehicle salvage for both individuals and businesses. Services & What to Expect Mark Paule Metal Recycling runs a scrap metal recycling center with a self-service auto salvage yard. Customers can search for used auto parts like engines, transmissions, body panels, and mechanical components. The yard doesn’t offer tools or help for removing parts, so visitors should bring their own equipment. Scrap Metal Recycling The business buys scrap metals from individuals and companies, including: Aluminum Brass Lead Stainless steel Other non-ferrous and ferrous metals Prices follow market rates, and large loads may qualify for same-day pickup. Free quotes are available for selling scrap metal. Auto Salvage & Parts The yard has a selection of salvaged vehicles, including cars and trucks. Customers can look for parts such as: Engines and transmissions Body panels (doors, hoods, fenders) Suspension and drivetrain parts Electrical components (batteries, alternators, starters) Interior pieces (seats, dashboards, trim) The yard doesn’t list inventory online, so customers must check in person. No tools are provided, so bring your own. Junk Removal & Vehicle Salvage Mark Paule Metal Recycling handles junk removal and vehicle salvage. If you have an old car, truck, or scrap metal to get rid of, they can provide a quote and arrange pickup. For more on selling a junk vehicle, check out our cash for junk cars page. Location & Hours The yard is at 1749 Freeburg Ave, Belleville, IL 62220. It’s open Monday through Friday from 8:00 AM to 2:00 PM (UTC). The business is closed on weekends and holidays. Directions The yard is in Belleville, near Freeburg Ave and Illinois Route 159. It’s easy to reach from I-64 via Exit 15 (Freeburg Ave). On-site parking is available for customers. Contact Information Phone: (618) 235-7512 The business doesn’t have a website, but it has a Facebook page for updates. Call during business hours for questions. Frequently Asked Questions What are the hours for Mark Paule Metal Recycling? The yard is open Monday through Friday from 8:00 AM to 2:00 PM (UTC). It’s closed on weekends and holidays. Does Mark Paule Metal Recycling buy junk cars? Yes, the business buys scrap metals and junk vehicles. For details on selling a junk car, visit our cash for junk cars page. What kind of parts can I find at Mark Paule Metal Recycling? The yard has salvaged vehicles with parts like engines, transmissions, body panels, suspension components, electrical parts, and interior trim. Inventory changes often, so check in person. How does self-service auto salvage work at Mark Paule Metal Recycling? Customers can browse and remove parts from salvaged vehicles. The yard doesn’t provide tools, so bring your own. Part prices aren’t listed online—ask staff directly. Does Mark Paule Metal Recycling provide junk removal services? Yes, the business offers junk removal and vehicle salvage. They can give a free quote and arrange pickup for scrap metals and junk vehicles. Are there any tools available for removing parts at the yard? No, the yard doesn’t provide tools. Customers must bring their own if they plan to take parts from vehicles.

SA Recycling at 100 Sonny Perdue Dr, Savannah, GA 31408 SA Recycling is a scrap metal recycling center and auto salvage operation at 100 Sonny Perdue Dr in Savannah. They buy and process major metals like aluminum, copper, brass, stainless steel, and cast iron from businesses, industries, and homeowners. While their main focus is metal recycling, they also handle used auto parts and car components from salvage yards. Services & What to Bring SA Recycling handles scrap metal and used auto parts. Their services include: Buying and recycling aluminum, copper, brass, stainless steel, and cast iron Accepting used auto parts and car components from salvage yards Offering pickup for businesses within 50 miles of Savannah Sorting and grading scrap for efficient recycling They separate scrap by grade to make recycling easier. When possible, they reuse materials instead of sending them to a landfill. If you need car parts, they may have engines, transmissions, or body panels—call ahead to check. Got an old car taking up space? Instead of leaving it to rust, sell it for scrap. Many yards, including SA Recycling, pay for junk cars and haul them away. Location & Hours SA Recycling is at 100 Sonny Perdue Dr, Savannah, GA 31408. They’re open Monday through Friday from 7:00 AM to 4:30 PM and closed on weekends and holidays. The yard is easy to reach from Savannah’s main roads. For directions, plug the address into a maps app or visit their website . Day Hours Monday 7:00 AM – 4:30 PM Tuesday 7:00 AM – 4:30 PM Wednesday 7:00 AM – 4:30 PM Thursday 7:00 AM – 4:30 PM Friday 7:00 AM – 4:30 PM Saturday Closed Sunday Closed Frequently Asked Questions What are SA Recycling’s hours in Savannah? They’re open Monday through Friday, 7:00 AM to 4:30 PM. Closed weekends and holidays. Does SA Recycling buy junk cars? SA Recycling mainly deals in scrap metal, but they do take used auto parts. For junk car sales, check with them directly or look into other local yards that offer cash for cars . What auto parts are available at SA Recycling? They accept used auto parts from salvage yards, so you might find engines, transmissions, body panels, and other scrap vehicle parts. For exact inventory, call or visit in person. How does the salvage process work at SA Recycling? SA Recycling isn’t a self-service u-pull-it yard, but they do accept used auto parts. If you’re looking for a yard where you can browse and pull parts yourself, check nearby salvage operations. For scrap metal, bring it by during business hours. Does SA Recycling take residential scrap metal? Yes, they accept scrap metal from homeowners, including aluminum, copper, brass, stainless steel, and cast iron. Call ahead to confirm they take the specific metal you have. Is SA Recycling open on weekends? No, they’re closed on weekends and holidays. Their hours are Monday through Friday, 7:00 AM to 4:30 PM.

Schneiders Scrap Metal Inc at 631 W Eckert St, Osgood, IN 47037 Schneiders Scrap Metal Inc is a scrap metal and auto salvage yard in Osgood, Indiana, at 631 W Eckert St. They handle scrap metal recycling, auto part salvage, and self-service junkyard access. Customers can sell scrap metal and recover parts from wrecked vehicles. The yard accepts non-ferrous and ferrous metals, along with used auto parts, and pays cash on the spot. The yard is open Monday through Friday, closing at 4:15 PM—earlier than the 4:30 PM sign out front. Customers arriving close to closing time have reported being turned away, so plan ahead. Services & What to Expect Schneiders Scrap Metal Inc offers scrap metal recycling and self-service auto salvage. For scrap metal, they take copper, aluminum, brass, steel, and other metals, weighing and paying customers immediately. The yard doesn’t have a public parts catalog, so customers must search the lot for usable auto parts. Tools are available for rent or purchase on-site, and some customers have found working engines, transmissions, and body panels. How Self-Service Salvage Works No appointment needed—customers can search the lot during business hours. Tools like cutting torches and wrenches are available for rent or purchase. Bring your own if you prefer. Customers pay a fee based on the weight of metal removed from parts. The yard doesn’t sell parts directly—you take what you find. Scrap metal is paid for on the spot after weighing. Auto parts are taken as-is. What to Bring Gloves and safety gear—some wrecks are sharp or unstable. Tools if you have them, or rent on-site. A truck or trailer to haul parts away. Cash for tool rentals or part removal fees. What They Buy Schneiders Scrap Metal Inc buys scrap metal by the pound, with prices varying by material. They don’t buy whole vehicles unless they’re already dismantled. If you’re looking to sell an old car, check local cash-for-junk-cars buyers for better deals. Location & Hours The yard is at 631 W Eckert St, Osgood, IN 47037. It’s open Monday through Friday from 8:00 AM to 4:15 PM. The yard stops accepting scrap and parts removal at 4:15 PM, even if the gate is still open. Customers arriving after that risk being turned away. Directions From I-65, take Exit 65 toward Osgood. Turn left onto W Eckert St—Schneiders Scrap Metal Inc will be on the right, marked by a large scrap yard sign. The lot is fenced, with entry through a gated driveway. Parking is near the scale house. Contact Phone: (812) 689-4549 Website: Not publicly listed (verified via scrap metal directories). Customer Experiences Reviews for Schneiders Scrap Metal Inc are mixed. Some customers like the straightforward process, while others complain about the early closing time. Here’s what people say: Positive Feedback Fair scrap metal prices—customers say they get good rates for copper, aluminum, and other non-ferrous metals. One reviewer called it "easy money" for selling scrap from an old house. Helpful staff—some employees take time to explain how to maximize scrap value, which is rare in the industry. No hassle for bulk scrap—customers with large loads of mixed metals report a smooth process with little paperwork. Common Complaints Early closing—customers have been turned away just before 4:30 PM because the yard stops service at 4:15 PM. Some say it’s frustrating to arrive on time and be sent away. Inconsistent tool availability—rented tools like cutting torches aren’t always in working order, so some customers bring their own. Limited part selection—parts aren’t organized by make or model, so finding specific items takes digging through multiple wrecks. Notable Incidents One customer reported an employee (identified as Ralph) acting drunk and rude during a late-afternoon visit. She arrived at 4:25 PM after being told 4:30 PM was fine and was locked out. Another customer waited 30 minutes in line while employees unloaded a dump truck of aluminum, then left without being served. Large deliveries can delay service for individuals. Frequently Asked Questions What are the hours for Schneiders Scrap Metal Inc? The yard is open Monday through Friday from 8:00 AM to 4:15 PM. The yard stops accepting scrap and parts removal at 4:15 PM, even if the gate is still open. Arrive early to avoid being turned away. Does Schneiders Scrap Metal Inc buy junk cars? No, they don’t buy whole junk cars. The yard buys scrap metal by the pound and lets customers remove parts from wrecks already on-site. For selling a junk car, check local cash-for-junk-cars buyers in Osgood or nearby areas. What kind of parts can I find at Schneiders Scrap Metal Inc? The yard has wrecked cars, trucks, and some farm equipment. Common finds include engines, transmissions, body panels, bumpers, and interior parts. Parts aren’t organized by make or model, so you’ll need to search the lot. High-demand items like catalytic converters often disappear quickly. How does self-service auto salvage work at Schneiders Scrap Metal Inc? Customers pay a fee to enter the lot and remove parts from wrecked vehicles. Tools like cutting torches and wrenches are available for rent or purchase on-site. Once you remove parts, you pay a fee based on the metal weight. The yard doesn’t sell parts—you take what you find. Bring a truck or trailer to haul parts away. Is there a parts catalog or inventory list? No, the yard doesn’t have a public parts catalog. You’ll need to search the lot yourself for the parts you need. This can take time, especially if you’re looking for something specific. What should I bring when visiting the yard? Bring gloves, safety gear, and tools if you have them. A truck or trailer is a must for hauling parts. Cash is needed for tool rentals and part removal fees. Some customers recommend bringing their own cutting torch to avoid issues with rented equipment.